The Ultimate Pipe Flashing® is made from ultra-pure silicone. Just like sand, it is made from silica and is 100% stable in the sun. Most of all, it’s about the proprietary design. Proprietary compression collar makes a watertight seal for the life of the roof. Flat to very steep slopes (18/12+) Size specific for Schedule 40 PVC, ABS, and some Iron Pipe. Copper & Cast Iron must use the EasySleeve® or EasyFit™.

Guaranteed weathertight for the life of your roof. See warranty for details.

Made in USA

The Ultimate Pipe Flashing® is made from ultra-pure silicone. Just like sand, it is made from silica and it is 100% stable in the sun. Most of all, it’s all about its proprietary design.

Made from Roofinox® 316L Marine grade stainless steel for coastal environments or exceptional performance is desired.

Proprietary compression collar makes a watertight seal for the life of the roof.

Also available in 24ga galv. Dark Bronze Kynar®

Generous perimeter flashing allowing for proper watertight installation: 4” of flashing on each side, 5½” at the top, and 3” on the bottom.

Flat to very steep slopes (18/12+)

Size specific to Schedule 40 PVC, ABS, Some Iron Pipes, Copper & Cast Iron use EasySleeve® or EasyFit™

Guaranteed weathertight for the life of your roof. See warranty for details.

Made in USA

The Ultimate Pipe Flashing® is made from pure silicone. Just like sand, it is made from silica and it is 100% stable in the sun. Most of all, it’s all about its proprietary design.

Proprietary compression collar makes a watertight seal for the life of the roof.

Flat to very steep slopes (18/12+)

Size specific to Schedule 40 PVC, ABS, Some Iron Pipes, Copper & Cast Iron use EASYSleeve® or EASYFit™

Guaranteed weathertight for the life of your roof. See warranty for details.

Made in USA

Removable cap for easy cleaning. The 24 ga. galvanized metal Kynar® clad cap is locked onto a high temperature ASA polymer sub-cap for exceptional strength and impact and the radiused interior is designed for optimum air flow. Angled ASA interior structure allows for condensation drainage and protection from wind-driven rain. The substrate’s built-in wind walls, weep holes, and rubber damper cushions provide for quieter operation. Passivated stainless steel axle, 316L marine grade stainless steel fastener clips, along with black oxide stainless steel screws for easy removal and a lifetime service. Removable snap-in stainless steel screen (for bath venting only). 4” galvanized snap-in drop connector and 3” adapter included. Available in 5 standard Kynar® colors.

Removable cap for service

Rubber damper cushions for a quieter operation.

Removable snap-in stainless steel screen (for bath venting ONLY)

Even the black oxide screws are stainless steel, for a lifetime of easy cap removal.

Built to truly last the life of the roof.

For use with 3” and 4” pipe. The galvanized snap-in drop and pipe and 3” adapter are included.

Made in USA

Removable cap for easy cleaning. The 24 ga. galvanized metal Kynar® clad cap is locked onto a high temperature ASA polymer sub-cap for exceptional strength and impact and the radiused interior is designed for optimum air flow. Angled ASA interior structure allows for condensation drainage and protection from wind-driven rain. The substrate’s built-in wind walls, weep holes, and rubber damper cushions provide for quieter operation. Passivated stainless steel axle, 316L marine grade stainless steel fastener clips, along with black oxide stainless steel screws for easy removal and a lifetime service. Removable snap-in stainless steel screen (for bath venting only). 4” galvanized snap-in drop connector and 3” adapter included.

Large Kynar® coated flashing plate allows for a watertight installation.

Removable cap for service

Rubber damper cushions for a quieter operation.

Large plate for a leak-proof installation.

Removable snap-in stainless steel screen (for bath venting ONLY)

Even the black oxide screws are stainless steel, for a lifetime of easy cap removal

Built to truly last the life of the roof.

For use with 3” and 4” pipe. The galvanized snap-in drop pipe and 3” adapter are included.

Made in USA

Easily retrofits Sch. 30 (Radon) to Sch. 40 PVC

Designed by the Founder of Real Tool® snow guards

Designed to fit many architectural profiles to .5 inch

Made from Almag 35, a pure certified aircraft alloy. Its incredible elongation makes it super strong

Custom-made stainless steel concave and convex opposing set screws provide superior attachment

Available in mill finish (stock) or call for special order Kynar® colors

Made in USA

Designed by the Founder of Real Tool® snow guards

Angled set screws help prevent panel damage

The set screws form an I-Beam structure in the patented square pocket for an incredible hold!

Oval point stainless steel set screws help protect the seam from damage

Made from Almag 35, a pure certified aircraft alloy. Its incredible elongation makes it super strong

Available in mill finish or 10 factory applied Kynar® colors

Made in USA

For 3” & 4” cast iron total above-roof pipe replacement

For use with the Ultimate Pipe Flashing®

Install a new pipe in less than 10 minutes! (See video)

Cast iron’s inherently irregular surface along with corrosion and residual repairs often make it very difficult to properly seal. The Lifetime Tool® EASYFit™ is both incredibly quick and extremely cost effective. Our patented technology includes an 18” formulated PMMA polymer cap stock for extreme weatherability bonded to PVC for strength and impact and a thick-walled coupling. The three flexible seal rings provide stability and prevent the downdraft of sewer gases. The tap-in no glue compression cap provides superior crush resistance against heavy snow loads and impacts. Finish the system with the Ultimate Pipe Flashing®.

Cut cast iron pipe flush with the frontal roof decking or sheathing. (See video)

Use a reciprocating saw with a specialty cast iron cutting blade (available from your local building material supplier).

Oil blade frequently while cutting at low RPM (go slowly).

Cut EASYFit™ to desired length.

Apply a fat bead of urethane caulk for added seal and/or uneven cuts. Press EASYFit™ into cast iron pipe.

Insert no glue compression cap until seated. Tap if necessary.

Made in USA.

For use with the Ultimate Pipe Flashing®

Retrofits copper & cast iron pipe

ASA polymer cap stock for extreme weatherability

Not intended to be used as a pipe extender.

Made in USA

The Ultimate Pipe Flashing® is pipe size specific for PVC, ABS, and some galvanized iron pipe. For copper and cast iron you must use the Lifetime Tool® EASYSleeve® or EASYFit™. Formulated from black PMMA polymer cap stock for weatherability over PVC for strength and impact. The EASYSleeve® utilizes an integral nesting cap that effortlessly addresses both size and condition issues. It’s a quick and simple installation that ensures a weathertight seal.